Where is the wear resistance of acid and alkali resistant rubber sheet?
The main use of acid and alkali resistant rubber sheets is as movable seals. Its performance is very good, so the rotation speed of the rotating shaft is relatively high. Sealed products need to withstand very large frictional torques. If the lubrication effect is not good, the use effect is very outstanding. Let us explain the information about this product.
When using acid and alkali resistant rubber board , be careful not to contact it with oil medium for a long time, so it will swell inside and reduce its strength and mechanical properties. The properties of various oils are mainly due to the polarity of its rubber and oils. Larger rubber and non-polar petroleum products contact type, when the polarity difference between the two is relatively large, the rubber at this time is not easy for you to rise. For example, Ding Qingjiao has very good oil resistance to non-polar oils. One of the main uses of this product is for moving seals. The rotation speed of Changhong and the rotating shaft is very high, and the sealing products need to bear a large friction torque, especially in the case of poor lubrication, the heat generated in the sealing area is very large, which will cause the rubber to stick or become metallic. The increased viscosity causes the seal to fail, which results in seal failure. One of the effective ways to reduce friction or temperature is to add lubricating filler to the rubber. Above is the relevant information of acid and alkali resistant rubber sheet. Only follow the correct method. Just don't let these small things happen during the installation. In this way, it can make it play a very good effect in the process of use. The following content is shared here for everyone. If you are interested in our products, you can come to our company to discuss cooperation at any time.