Industrial rubber sheet manufacturer introduces rubber flooring
Our country is a major producer of industrial rubber sheet products. At the same time, our country has a large demand for rubber sheet products. This product can be widely used in all aspects of industrial production and daily life in our country. Today we want to serve you Introduce the laying of rubber flooring products.
First of all, when this product is laid on the ground, the environment must be ventilated and dry. If the humidity can not meet the requirements, install a fan on the site to strengthen the ventilation and drying. Grind the gray and cement scars on the floor with a sander before installation. Use a high-powered vacuum cleaner to remove all kinds of sand and sand on the floor of the rubber floor and remove the floor. If the hardness is not up to the requirements or the soft sandy ground, the rubber flooring should be removed from the floating sand and the soft layer, firstly apply the interface agent, and then smooth it manually with a colloidal mortar. The ground level of the rubber floor can not reach the required level. The raised convex hull is ground with a gold-steel knife grinder, and the lower pits are leveled with a rubber mortar. The rubber floor level is kept average within the range of 40 m 2 The height difference is not more than 4mm. After laying the floor, it needs to perform various daily maintenance, such as daily temperature and humidity maintenance.
Our company's industrial rubber sheet products are one of the best domestic products at present. When used for floor laying, this product has good elasticity and beautiful appearance. It is widely used in kindergartens, basketball courts and other places. All colleagues in our company welcome customers from all over the country to come to discuss cooperation.